125 mm long needle nose pliers with cutting edge for electricians and fitters

Pliers for gripping, positioning and cutting

Compact in terms of dimensions, large in performance: the Knipex 25 01 125 which is pointed at the front is suitable both for the fine, well-measured and firm gripping and holding of components as well as for the powerful cutting of cable and wire. The cutting edges are ground to produce an efficient bite type cut.

Thanks to additional induction hardening of the blades to approx. 61 HRC cutting edge hardness, the Knipex 25 01 125 can be used for the powerful cutting of cable as well as soft, medium-hard (cutting capacity Ø 2.2 mm) and even hard wire (cutting capacity Ø 1.6 mm).

Stable needle nose pliers, also when twisting and during powerful cutting

The precision tips of the Knipex 25 01 125 are elastic and therefore remain stable when twisted. The user can ideally measure the manual force deployed. Larger components can be held securely, smaller components can be gripped gently. The position of the cutting edges near the joint produces favourable results for transmitting manual force to the material to be cut. The effort required during cutting is therefore correspondingly low.

Work well even in confined spaces

The extremely compact Knipex 25 01 125 needle nose pliers are very suitable for working in confined spaces, because they are pointed at the front. Components and wire can be gripped and held where space is tight. Their size is also an advantage because you can easily take these small needle nose pliers along in your jacket pocket.