Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 4 - Jul 9
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
HC812-400 PRODescription Ideal for 2 wing swing gates up to 3,5m 11,4ft each wing (total gate length up to 7m 22,96ft) The perfect heavy duty gate opener. Comes with powerful 400mm long stroke motor features DUCO FAST technology to open your gate faster than ever! SOFT STOP & many additional advanced features included. Ideal for residential & commercial use DUCO FAST technology Quick closing and opening Open your door faster than ever! Powerful & reliable high
Description
Ideal for 2 wing swing gates up to 3,5m/11,4ft each wing
(total gate length up to 7m/22,96ft)
The perfect heavy duty gate opener.
Comes with powerful 400mm long stroke motor
features
DUCO FAST technology to open your gate faster than ever!
SOFT STOP & many additional advanced features included.
Ideal for residential & commercial use
DUCO FAST technology
- Quick closing and opening
- Open your door faster than ever!
- Powerful & reliable high speed motors faster than ever. Ensures faster opening and closing of your door
- The perfect answer where rapid manoeuvres are required, ensuring the shortest standing time and the maximum safety: for urban high-traffic areas ensures prompt action where rapid intervention is needed.
DUCOSOL Technology
Versatile, operates by 3 type of power supply
- A.C. 110/230V 60/50Hz
- By emergency battery
- By solar panel
Ensures 100% autonomous use even where AC power is unavailable
Highly reliable as featured with Ducati's reduced consumption technology: with only 7mA stand-by consumption ensures long lasting performances in all weather condition. Ideal for residential use. Up to 50 cycles daily guaranteed . No additional modules requires: it's all included: on board solar panel & battery recharge management!
SOFT STOP
- The opener stops in both directions decreasing the speed and avoiding unwished banging closing.
- This prevent from usury and ensure long life to your opener and door.
- This function prevents the door banging closing
ARS (Automatic Reversal System)
Thanks to the integrated amperometrical detection system and direction sensor, the opener is provided with an automatic reversal system in case the gate reaches an obstacle, the opener stops immediately and reverses automatically. Highest safety is ensured.
DUCO SAFE
obstacle detection safety system guarantees maximal safety of use to your family
SELF LOCK TECHNOLOGY
The self-locking properties of the spindle increase the protection against a dangerous and unauthorized “pressing” of the gate and the otherwise necessary e-locks for the final positions can be omitted. A massive 20 mm diameter three principle steel spindle made of PR80 steel ensures long and reliable operation
Kit Contents
- 2x HC412 - 400mm stroke telescopic electro mechanic irreversible actuators supplied with 1 m outdoor use cable H05RN-F 2 x 1mmq
- set of actuator's fixing brackets
- 1x KONTROL 9048 large control box with electronic board, toroidal transformer, integrated radio receiver
- 2x 6203Roll - 2 buttons 433,92 Mhz rolling code radio transmitters
- 1x HC7500 - blinking light 12V ( 24V for 24V variant)
- 1x SW5000 - key switch
- 1 pair of safety infrared photocells
- 1 external antenna
- 1x key for manual emergency release
- 1x instruction manual
Features
- POWERFUL 400mm stroke telescopic actuators
- Quick closing and opening. Open your door faster than ever !
- FAST speed with SOFT STOP
- Obstacle detection sensitivity adjustment
- SOFT STOP adjustment: you can postpose/anticipate the slowdown phase
- Inverse movement by obstacle detection while closing
- Obstacle detection sensitivity adjustment
- Control unit with integrated battery housing compartment
- Integrated battery charger on board: just ready for connection to 1 x 12V battery ( for 12V version) or 2 x 12V emergency batteries in series connected( for 24V version). In case of power failure works autonomously up to 3 days
- Integrated solar panel management: the card is a just ready to operate autonomously powered by solar panel. NOTE: For 12V version add a standard 12V battery + 1 x 12V min.10W solar panel. For 24V version add 2 x 12V batteries in series connected + 24V min. 20W solar panel. No extra module needed
- Low consumption technology: only 0,007A stand-by consumption for the 12V version and only 0,014A ! Protect the environment, reduces waste of energy and gives long lasting autonomy with battery /solar panel use
- Adjustable motor power/ obstacle detection sensivity. By decreasing the power the gate opener will be more sensible in case of impact on an obstacle. The adjustment is very easy: just need to rotate potentiometer related to each motor.
- Status Warning light output: an external wired LED light can be connected to indicate if the gate is open, closed, closing or opening
- Ideal for a safe, quick and easy installation: the system is electrocution risk-free.
- heavy duty opener: can work in continuous cycles without overheating
- Adjustment of the time lag between the two doors
- Pedestrian opening (1 partial opening of one wing to allow the pedestrian crossing) can be controlled by remote control or wired control.
- Possibility of connecting an external timed courtesy light (example: garden light)
- The gate is automatically locked in closed position ( irreversibile system).
- Electro-lock is not needed, but recommended for wing longer than 2,8m each. Warning: Compatible only with electric-lock with Booster ( to convert dc output into ac electrolock power supply)
- heavy duty opener: can work in continuous cycles without overheating
-
Manual release system by universal triangular key
- Made in Italy - All components are manufactured in the company to warranty high quality and reliability.
- After sale service and assistance provided directly by manufacturer without intermediaries
- Easy self-storing of the remotes controls by pushing one button
- Safety is ensured by an sensitive amperometrical obstacle detection system and pressure control. Photocells ( safety beans) are no longer mandatory. Photocells are an optional accessory that can be helpful to prevent scratches to the painting of vehicles left in the vicinity of a moving gate. (EN13241-1: 2003 + A1 ( April 2011 ) EN12453 : 2002 EN12445 : 2000)
- CE conformity: product certified on all points of the current European regulations. Notify body as NEMKO / INTERTEK test reports & certificates available on request
- Totally in house designed software and hardware are focused on reduce energy consumption and with attention to the absolute reliability using innovative components of the latest generation as our High quality radio receiver hybrid
- Ducati chooses to use toroidal transformers only to achieve maximum reliability and safety by power surges and ESD. Our Standard 230V-50Hz transformer is also available in 110V/60Hz version.
Technical data
ACTUATOR TECHNICAL DATA
ELECROMECHANICAL TELESCOPIC ACTUATOR HC412
|
|
|
| dc motor (24V version) | 60W (120W) |
| max pushing & power (24V version) | 1200N (2400N) |
| Stroke | 400mm |
| motor speed | 2 cm/sec |
| telescopic actuator | √ |
| working cycles limit | continuous use/ no limits |
| working temperature | -20°C/+50°C |
| max wing length | 3,5m/11,4ft each leaf |
| max.wing weight (24V version) | 350kg/700lb each leaf (400kg) |
| max. opening angle | 137° |
| automatic wing lock | √ irreversible actuator |
| manual release system | √ by triangular key |
| Max "C" measure (see pillar installation diagram hereunder) to install the actuator avoiding any masonry work on the pillar | 19 cm |
| Compatible with gate opening towards outside | √ |
NOTE: the actuator will stop by amperometric detection system: it therefore requires mechanical limits to be installed on the floor to stop the gate wing in the open and closed position. Special actuator model HC412 in "FC" version are featured with on-board mechanical limits for the open wing position.
CTH48 ELECTRONIC BOARD TECHNICAL DATA
(solar panel & battery management on board)
|
|
Versatile, operates by 3 type of power supply
|
| toroidal transformer's Watts | 105W output 0-12V-24V |
| protection fuse
|
√10AF |
| transformer protection fuse | 0,8AT (1,2AT for 110V transformer) |
| use on single or double wing gate | √ |
| output services
(24V version)
|
12V ( 24V) |
| stand-by power consumption (24V version) | 0,007A (0,012A) |
| radio receiver | 2 channels ( 1 for full cycle opening, 1 for pedestrian access- partial 1 wing opening) |
| remote controls channels storage capacity | 20 codes |
| radio transmission protocol | DUCATI rolling code |
| radio frequency | 433,92MHz |
| remote control automatic learning | √ |
| on board antenna | √ |
| external antenna input | √ |
| automatic closure working mode | √ with adjustable pause time up to 100 sec. |
| step by step working | √ one pulse to open; one pulse to close |
| motor power adjustment | √ by potentiometer |
| SOFT STOP | √ adjustable by potentiometer |
| Speed | EXTRA FAST 2cm/sec |
| Obstacle detection safety system (DUCO SAFE) |
|
| ARS auto reversal system on obstacle detection | √ |
| Wings time lag adjustment | √ |
| In compliance with EU-CE norms | √ |
| timerized courtesy light output (24V version) | √ 12V max 10W (24V max. 10W) |
| output for remote advising light of gate status | √ 12V max 10W (24V max. 10W) light on while gate is open, light off while gate is closed, fast blinking while closing, slow blinking while opening |
|
flashing light output (24V version) |
√ 12V max.10W lamp (24V max.10W) blinks quickly while closing, blinks slowly while opening |
| electric lock output | √ additional booster needed to convert dc electrolock output into ac |
| safety beam-photocells input (NC contact) | √ NC normally closed contact Note: use of special low consumption photocells is recommended: use only DUCATI low consumption photocells model 7120 |
| full cycle START input (NO contact) | √ |
| pedestrian cycle START input ( NO contact) | √ |
| Emergency STOP button input (NC contact) | √ |
Manual
CLICK HERE to download the general instruction manual
HC412 actuator installation diagram
CTH48 Manual electronic board wiring diagram
6203Roll remote control instructions
CTH48 installation video
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 2285 reviews
Sort
Product Reviews
★★★★★ 5
Perfect for my Epson 2720!
When my Epson 2720 printer pooped out on me and said my ink waste box was full, I was so sad. After watching a billion YouTube videos, I learned there are a ton of people selling new ink boxes and I had no clue which one to pick.
I am the most electronically illiterate person on the planet so I just knew it wouldn't be easy for me to fix... wrong! This kit came with the new ink waste box, tools to change it out, a bag to throw the ink filled box into, instructions, and an extra pad for next time.
After removing the old box, the new one slid in perfectly. Resetting the wic code was extremely easy as well! The instructions show step by step diagrams on what to do. It was a fast and simple process.
It all worked out too well for me (normally it's a domino effect of chaos when I repair something) so the first print to see if it all worked was a nail biter. It printed beautifully!
If you have a 2720 that needs repaired, this is the product for you!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 14, 2026
★★★★★ 5
Worked printer fixed
Works well for what I needed , good instructions, for replacement, ink quality and fixed printer
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2026
★★★★★ 5
Great replacement waste ink pad!
This waste ink pad maintenance box works well as a replacement for my printer. It was easy to install and fits perfectly. The extra sponge is a nice bonus and helps absorb excess ink effectively. The packaging was secure and arrived in good condition.
My only small complaint is that it didn’t come with clear instructions, so I had to search online to be sure I was installing it correctly. Other than that, it does the job and is a cost-effective alternative to the original brand.
Would definitely recommend if you’re looking for a reliable maintenance box!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 25, 2025
★★★★★ 4
MAC OS users read this
1. There is no way around needing to reset the waste ink counter by downloading software, unless you want to pay for Epson to fix your printer. Replacing the waste ink tank alone will not make your printer work. Most of the WIC software you'll find if you google search this issue is only for WINDOWS.
2. The software recommendation that came with this part was for WINDOWS users only. It's an .exe file. I researched and found one that's for MAC, and LINUX (as well as windows.) I had to read the FAQ on that site to learn how to tell my MAC I was willing to bypass security and install it, but this was simple, and I was even able to use a trial key instead of paying. The trial key reset the counter to 80% so I'll need to go through the process again sooner than if I'd paid, but I was pleased to find out it would work first before buying a key. The site was "my printer club."
3. I have zero affiliation with "my printer club." Just trying to help out MAC users who may think they're out of luck, as it even says on the Epson site, direct quote: "Yes, the service alert and service repair process may be temporarily delayed on most printers by using the Maintenance Reset Utility to enable printing for a short period of time. This method is available to Windows users (Windows 10, Windows 8, Windows 7, Windows Vista, and Windows XP) as a one-time option while customers determine the best next steps for repairs. Currently there is no Maintenance Reset Utility available to Mac OS users."
4. Installing the waste tank purchased here was quick and easy. I'm only giving 4 stars because I had no idea when I bought it that their instructions weren't for MAC.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 4, 2024
★★★★★ 5
Great support staff and perfect fit!
I had a bit of an issue with the reset, so I engaged customer service. Customer service was very friendly and assisted me with resetting the counter. The software was recently updated and is much easier and smarter than the older version. I had a great experience and loved that the kit worked and fit as expected (compatibility met).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 26, 2026