Raymarine RV-220 RealVision 3D Bronze Transducer Pair - 20 degree

Raymarine RV-220 RealVision 3D Bronze Transducer Pair - 20 degreeInstallation: Thru Hull Material: Bronze Max. Depth (ft): 3D: 300 I DownVision: 600 I Port: 300 I Starboard: 300 I Conical: 900 Frequency (KHz): RealVision I High CHIRP Beam Width (L H): 3D: 180 I Down: 60 I Conical: 25 Records: Depth and Temperature Approved Hull Material: Fiberglass Wood Cable Length (Ft): 33 Supported Deadrise: 15 25 Designed for inboard or outboard boats the RV 220 Bronze Through Hull Transducer System lets you easily identify

• Installation: Thru-Hull
• Material: Bronze
• Max. Depth (ft): 3D: 300 I DownVision: 600 I Port: 300 I Starboard: 300 I Conical: 900
• Frequency (KHz): RealVision I High CHIRP
• Beam Width (L/H): 3D: 180° I Down: 60° I Conical: 25°
• Records: Depth and Temperature
• Approved Hull Material: Fiberglass Wood
• Cable Length (Ft): 33
• Supported Deadrise: 15-25°

Designed for inboard or outboard boats the RV-220 Bronze Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D sonar.

The RV-220 system is a 4-channel Wide Spectrum CHIRP transducer system with DownVision SideVision high frequency CHIRP fish targeting and RealVision 3D sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery automatically compensating for vessel motion. You'll enjoy crystal-clear imagery in waves swells and while maneuvering. The RV-220 system also has a built-in fast response water temperature sensor for quick accurate readings.

Raymarine's RV-220 Bronze Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal offset to accommodate hull deadrise angles from 14° to 26°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-220 system works great on trailered boats too.

The RV-220 system features rugged cast-bronze through hull bodies suitable for fiberglass or wooden hulls. One transducer transmits and receives to port and downwards the other to starboard and downwards ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2-meter pigtail joining y-cable and 8-meter extension cable resulting in an overall cable length of 10 meters (33 feet.)

In The Box

• RV-220P Bronze Port Transducer with 2-meter cable
• RV-220S Bronze Starboard Transducer with 2-meter cable
• RealVision 3D Transducer Y-Cable
• RealVision 3D 8-meter (26-feet) Transducer Extension Cable
• Anti-rotation bolt kit
• Installation instructions